Go Back   Steve's Digicams Forums > Digicam Help > General Discussion

Thread Tools Search this Thread
Old Aug 9, 2004, 8:47 AM   #1
Junior Member
Join Date: Aug 2004
Posts: 15

Please excuse my ignorance/inexperience but what do you guys mean when you say that a camera has noise? Are you referring to the picture that is taken?


atroskie is offline   Reply With Quote
Sponsored Links
Old Aug 9, 2004, 9:04 AM   #2
Senior Member
ohenry's Avatar
Join Date: Dec 2003
Posts: 1,676

Noise refers to electronic interference that you notice when you look at the print. As you increase the sensitivity of the CCD/CMOS (higher ISO numbers), you increase the liklihood of noise, particularly in shadow areas. It becomes even more noticible as you increase the size of the image. Different camera manufactures and even models have varying thresholds regarding when noise becomes apparent. It can be removed to some extent using post processing tools. It is similar to what is known as "grain" in film.
ohenry is offline   Reply With Quote
Old Aug 9, 2004, 9:13 AM   #3
Senior Member
Chako's Avatar
Join Date: Jun 2004
Posts: 301

There is no such thing as a dumb question.

When people refer to noise, they are talking about artifacts found in their photos. High noise is a bad thing. Generally, the higher your camera's ISO setting the more noise you will get.

In 35mm cameras, you change your ISO by using faster/slower speeds. You can get ISO 100 (daytime), ISO 200, 400, 800, 1000+ films. The faster speed films will give you grainier photos. This is due to the emulsion layer, and how it was manufactured to be more light sensitive. Thus, faster ISO allows you to take photos in lower light conditions, but with a penalty in photo quality.

Well, with digital cameras, if you select a higher ISO, all this does is make the photo sensor more sensitive to light. This is done electronically. If you go high enough in your ISO settings, you will get signal interference, etc, that will show up as grain on your digital photo much like 35mm film.

Thus noise = grain.

People select higher ISO so that they can get acceptable shutter and aperture speeds in low light conditions. Some digital cameras are better at low light photography then others. This is due to several issues. The electronics, the size of the photo sensor area, and the programming used that operates your camera. Some cameras have noise removal features. Some work by doing it as you shoot, others work by taking a second photo with the shutter curtain or mirror down, thus allowing it to remove the oddnoisy pixels by using the black second frame as a guide.

Hope this helps.
Chako is offline   Reply With Quote
Old Aug 11, 2004, 6:54 AM   #4
Senior Member
Mikefellh's Avatar
Join Date: May 2004
Location: Toronto, ON, Canada
Posts: 1,707

Just to add, increasing ISO on a digital camera is like turning up the volume on a radio tuned to a poor quality station...you not only increase the signal but you also increase the static.
Mikefellh is offline   Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

All times are GMT -5. The time now is 1:24 PM.