Go Back   Steve's Digicams Forums > Misc Forums > Image & Film Scanners

Reply
 
Thread Tools Search this Thread
Old May 26, 2011, 7:32 PM   #1
Junior Member
 
Join Date: Feb 2011
Posts: 2
Default Powerlook 3000 Scanning Problems

Dear All,

I just got a UMAX Powerlook 3000 scanner and have tried to preview a scan in both Windows XP with an Adaptec 1460 PCMCIA-SCSI adapter and on Windows Vista with an Adaptec 1480A adapter. I have tried Silverfast, UMAXScan, and Vuescan and on both systems I have the same problem when hitting preview or scan. The glass moves out all the way and when it reaches the end, it makes a very loud ringing sound and stays out for about 10 min or so, it actually doesn't go back in or scan. I then have to turn off the scanner and turn it back on before it starts to slowly creep back into the machine, it takes a minute or so to go all the way in again.

I have heard it could be do to the sensor, the motor, or the cable/scsi card. The previous owner says it worked on his machine although he was using a desktop SCSI card not a PCMCIA one. Let me know what this could be and if there could be a way to fix it and/or test to see what's wrong with it? Perhaps it has to do with the SCSI ID? It is at 0 but I have tried it at 6 and 5 I think? I am using a 25-pin scsi cable to the PCMCIA card.

Thank you and Kind Regards,
Daniel
BaronKatz is offline   Reply With Quote
Sponsored Links
 
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



All times are GMT -5. The time now is 4:28 PM.