Go Back   Steve's Digicams Forums > Digital SLR and Interchangeable Lens Cameras > Pentax / Samsung dSLR, K Mount Mirrorless

Thread Tools Search this Thread
Old Dec 11, 2006, 8:53 AM   #1
Junior Member
Join Date: Dec 2006
Posts: 3

Hello - newbie (to auto-focus DSLRs) has question on lens compatability for my Samsung GX-1L. I purchased a 50mm 1.4 screw mount and adapter and a 28mm2.8 "K" mount off ebay. The Screw mount and adapter will mount and work in manual mode as the screw mount adapter is covered in a thin layer of black non-conductive paint. The 28mm2.8 when mounting causes the LCD display on the top of the camera to read "A--" and the camera does not work as the camera to lans contacts have been shorted out. I put a piece of Scotch tape on the lens covering the area where the camera body contacts would normally touch and it works fine now. Obviously I had the camera set to manual focus mode. I was wondering if this is what everybody does or if there is a way in the camera setup menus to disable these camera body to lens contacts so the Scotch tape was not needed?
jboldway is offline   Reply With Quote
Sponsored Links
Old Dec 11, 2006, 8:54 PM   #2
Senior Member
NonEntity1's Avatar
Join Date: Jul 2006
Location: Lake Placid Florida USA
Posts: 2,689

If I recall correctly, I had to change one setting to use non-"A" bayonet mount lenses on my K100d. I checked my menu and I believe the one I changed was under Custom and was titled "Use Aperture Ring." My current setting is 2. Try that and see if it does not work for you. If I am wrong, someone should chime in with the right setting to change.

NonEntity1 is offline   Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

All times are GMT -5. The time now is 11:54 AM.