Go Back   Steve's Digicams Forums > Printers > Photo Inkjet

Reply
 
Thread Tools Search this Thread
Old Sep 25, 2006, 3:52 PM   #1
Junior Member
 
Join Date: Sep 2006
Posts: 7
Default

Sorted my R300 RESET and waste ink modAny help availablewith CX3200afterachieving reset
johntolson is offline   Reply With Quote
Sponsored Links
Old Sep 28, 2006, 5:55 AM   #2
Junior Member
 
Join Date: Jul 2005
Posts: 9
Default

What sort of help are you after re Cx3200 ?
JudgeT is offline   Reply With Quote
Old Sep 28, 2006, 7:57 AM   #3
Junior Member
 
Join Date: Sep 2006
Posts: 7
Default

Is the proceduure the same dealing with the waste ink
johntolson is offline   Reply With Quote
Old Sep 28, 2006, 8:08 AM   #4
Junior Member
 
Join Date: Jul 2005
Posts: 9
Default

It is similar, but requires a little ingenuity. There is a small hatch at the rear right, secured with a vertical screw, undone from above.

This gives access to the relevant area, and the waste tube can be seen going off towards the pads. It needs teasing out, and the hatch either left off, or a hole made in it to allow the tube through.

That's about it, except to mention that you will need a fairly shallow receptacle, as the whole set-up re waste ink is rather low down as regards getting the tube out.

Hope this helps
JudgeT is offline   Reply With Quote
 
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



All times are GMT -5. The time now is 5:05 AM.