Go Back   Steve's Digicams Forums > Software > Printing General

Reply
 
Thread Tools Search this Thread
Old Aug 27, 2005, 12:16 PM   #1
Junior Member
 
davemc's Avatar
 
Join Date: Aug 2005
Posts: 1
Default

I have always had great prints from this printer, which is only about 1 year old. Suddenly, the last 2 prints have a feint line, about 1/10 inthick, about 1 inch from the end of the print.



Any help on how to sort this would be appreciated.:O
davemc is offline   Reply With Quote
Sponsored Links
Old Aug 31, 2005, 10:13 PM   #2
Senior Member
 
bernabeu's Avatar
 
Join Date: Jan 2005
Posts: 990
Default

if the line runs in the same direction as the paper moves through the printer (parallel with the long side) it is probably a 'scratch' from a sticking 'star' wheel



the rubber drive wheelsaare under the paper and a 'star shaped' follower rides the printed surface with ever so slight pressure leaving invisible marks in the print, however if the wheel 'sticks' (usually from a tiny bit of paper jammed) it will leave a tell-tale scratch/line



good luck clearing/freeing the wheel as they are virtually inaccessable w/o a major disassembly
bernabeu is offline   Reply With Quote
 
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



All times are GMT -5. The time now is 10:23 AM.