Go Back   Steve's Digicams Forums > Software > Printing - Qimage Support Forum

Reply
 
Thread Tools Search this Thread
Old Jun 28, 2008, 12:53 PM   #1
Junior Member
 
Join Date: Jun 2008
Posts: 2
Default

I'm new to Qimage and am having difficulties printing with a 1/8" border so I can frame the photo. I'm using a HP 9180 printer and 13x19 paper. The print properties tab is showing 18.75 x 12.72 which is fine. However, when I select B+ as my paper in the printer driver, Qimage show my page as 18.533 x 12.72. I tried creating a custom page in my printer driver (13x19), but this didn't change the Qimage setting. When I select Borderless B+, my page dimensions in Qimage do change to 13x19 but the print comes out borderless even with print properties set at 18.75 x 12.72. Thanks for any help.
bob169 is offline   Reply With Quote
Sponsored Links
Old Jun 30, 2008, 6:24 PM   #2
Senior Member
 
Join Date: Jun 2002
Posts: 556
Default

It may prove difficult to create a 13x19 print with 1/8 inch border because you will likely need to use borderless mode to create the print yet borderless mode is very difficult to control at the edges due to driver overspray. I think this article may help:

http://www.steves-digicams.com/techcorner/dec_2007.html

Mike
http://www.ddisoftware.com
mchaney is offline   Reply With Quote
 
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



All times are GMT -5. The time now is 11:00 PM.