Go Back   Steve's Digicams Forums > Software > Printing - Qimage Support Forum

Reply
 
Thread Tools Search this Thread
Old May 4, 2005, 3:34 PM   #1
Junior Member
 
Join Date: May 2005
Posts: 2
Default

I'm using qimage and Epson Pro 4000. When I try to print a bunch of different sized prints using borderless on 16" wide roll paper the prints come out sized wrong.

For example, if I print 4 - 4x6's borderlessly, the paper that comes out should be 16x6 and each pictures should be 4" wide. RIGHT?

However, what happens is...my prints come out 6" tall, but from left to right they are

3-7/8" wide / 4" wide / 4" wide / 4" wide and then a 1/8" white gap to the edge of the page.

Also, the left photo has 1/8" cut off of the left side.

So, I need to figure out how to get qimage to slide those images over to the right 1/8"

Anyone know how to do this?

Matt
Matt J. is offline   Reply With Quote
Sponsored Links
Old May 4, 2005, 3:38 PM   #2
Junior Member
 
Join Date: May 2005
Posts: 2
Default

Also, I have my printer driver set up for borderless as follows

Borderless box - Checked

Borderless mode "Retain Size"

Paper Size: 15.97" x 6" - The epson manual recommends that to get borderless prints using the retain size mode and 16" wide paper your Image width should be 16.2". For some reason when I put in 15.97 as my width, it comes up in qimage as 16.2".

Also - I'm using "optimal placement" in qimage.

Matt

Matt J. is offline   Reply With Quote
 
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



All times are GMT -5. The time now is 1:22 AM.