View Single Post
Old Apr 9, 2006, 12:58 AM   #2
John H
Senior Member
 
Join Date: Sep 2005
Posts: 112
Default

Trigger voltage of the flash unit must not exceedthe capacity of the camera!! If trigger voltage exceeds the camera specs, damage might occur to the camera. The FZ30 has a flash trigger voltage rated at 24 volts DC. Heres a pic that shows how to check the trigger voltage on the flash. First, turn the flash on so that it`s ready to strobe. Then using a volt meter, set the meter, and leads as shown in the pic. The pic displays the trigger voltage for that flash unit. I don`t use that flash for my FZ because it far exceeds the 24 volt limit.
Attached Images
 
John H is offline   Reply With Quote