|
![]() |
|
LinkBack | Thread Tools | Search this Thread |
![]() |
#1 |
Senior Member
Join Date: Aug 2005
Posts: 490
|
![]()
Hi,
I want to use filters with my S602. I have looked at adaptor tubes and found there are many different sizes: all are 55mm at the barrel end but at the other end the width varies. Is there a standard? Should it stay the same (55 - 55) or maybe increase or decrease? Can anybody tell me what the best way to go is. I suppose it depends if there is a standard size for attachments?? Hoping somebody can help. Dom |
![]() |
![]() |
Sponsored Links |
|
![]() |
#2 |
Member
Join Date: Jun 2005
Posts: 92
|
![]()
Hello Dom,
The following site may be of interest: http://www.camerafilters.com/pages/a...tubesfuji.aspx I would recommend you to either remain with the 55/55mm adapter tube or see if you can get one that offers 55/58mm for attaching filters, additional lenses, etc. I may be wrong but I think you will find more goodies available with a 58mm diameter than 55mm. Taking it the other way i.e. less than 55mm will most probably cause considerable vignetting to occur. Good luck! Cheers - Herman |
![]() |
![]() |
![]() |
#3 |
Senior Member
Join Date: Feb 2004
Posts: 401
|
![]()
Try to get one that is 55mm both ends.If you get smaller,you will have to get a step down ring, if you go bigger you have to get a step up ring.Going smaller causes vignetting problems.Hope this helps.
|
![]() |
![]() |
![]() |
Thread Tools | Search this Thread |
|
|