Steve'sDigicams

Jayvee · Mar 9, 2003, 2:56 PM

I would appreciate a step by step, how to program my F717 with the HGD 1758 teleconversion lens. I just can't seem to get it to function. Many Thanks.

JimHunt · Mar 10, 2003, 1:03 PM

Hi JayVee. You'll probably need to describe what you're doing and the results you're getting before you can get much help. Is your problem focussing, vignetting, attaching the teleconverter...?

Jayvee · Mar 10, 2003, 8:45 PM

Thanks Jim for your advice. After following the few instructions from Sony, I just don't feel I'm getting the 2 X power of the teleconversion lens. Focus is also a problem. Perhaps I'm expecting too much from the lens. It is an expensive accessory thus my higher expectatations. Any thoughts?
Thank You
Jayvee

Jayvee · Mar 10, 2003, 8:45 PM

Thanks Jim for your advice. After following the few instructions from Sony, I just don't feel I'm getting the 2 X power of the teleconversion lens. Focus is also a problem. Perhaps I'm expecting too much from the lens. It is an expensive accessory thus my higher expectatations. Any thoughts?
Thank You
Jayvee

Lin Evans · Mar 13, 2003, 3:56 PM

You really don't "need" to program anything - just put the teleconverter on and observe the LCD or viewfinder. Zoom in until the shadows in the corner go away or further.

The only thing "programming" does is limit the travel on the zoom to prevent getting wide angle shots with vignetting (black border).

Autofocus, metering, white balance and such are not affected by the presence or absence of a teleconverter.

Post a couple shots and maybe we can see if your results are somewhat typical or if there is a problem.

Lin

Mar 9, 2003, 2:56 PM	#1
Jayvee Junior Member Join Date: Mar 2003 Posts: 3	Sony teleconversion lens HGD1758 problems I would appreciate a step by step, how to program my F717 with the HGD 1758 teleconversion lens. I just can't seem to get it to function. Many Thanks.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Steve'sDigicams

Recent Camera Reviews

Most Active Forums

Most Popular Deals

Latest Feature Articles

Mar 10, 2003, 1:03 PM	#2
JimHunt Senior Member Join Date: Jun 2002 Posts: 147	Hi JayVee. You'll probably need to describe what you're doing and the results you're getting before you can get much help. Is your problem focussing, vignetting, attaching the teleconverter...?

Mar 10, 2003, 8:45 PM	#3
Jayvee Junior Member Join Date: Mar 2003 Posts: 3	Thanks Jim for your advice. After following the few instructions from Sony, I just don't feel I'm getting the 2 X power of the teleconversion lens. Focus is also a problem. Perhaps I'm expecting too much from the lens. It is an expensive accessory thus my higher expectatations. Any thoughts? Thank You Jayvee

Mar 13, 2003, 3:56 PM	#5
Lin Evans Moderator Join Date: Jun 2002 Posts: 1,141	You really don't "need" to program anything - just put the teleconverter on and observe the LCD or viewfinder. Zoom in until the shadows in the corner go away or further. The only thing "programming" does is limit the travel on the zoom to prevent getting wide angle shots with vignetting (black border). Autofocus, metering, white balance and such are not affected by the presence or absence of a teleconverter. Post a couple shots and maybe we can see if your results are somewhat typical or if there is a problem. Lin