|
![]() |
|
LinkBack | Thread Tools | Search this Thread |
![]() |
#1 |
Junior Member
Join Date: Apr 2010
Posts: 1
|
![]()
Hi,
Ive purchased a Epson 1410 (1400) and converted it to Dye Sub, it was only a cheap conversion with cheap ink till i get it all going the will use some good ink. I was wondering if someone can share some info for me including some questions i have below. When i print i have a profile i got for my machine, how do use it so it outputs through it in CS4 PS or Ill. When i print a image on heat transfer paper how long do i wait till i can put in the heat press? Is there a dye time. How do i tell which side is the transfer print side on the paper i got and if its self peel or not? What would your recommended heat temp and time settings be as a starting point. the press doesn't have a pressure setting. Any other pointers that could be of use to me? Thanks all in advance. |
![]() |
![]() |
Sponsored Links |
|
![]() |
#2 |
Junior Member
Join Date: Apr 2010
Posts: 9
|
![]()
i have a couple answers ...Use the brightest white side of paper...........Heat 375-400 degrees 45-60 seconds.......
|
![]() |
![]() |
![]() |
Thread Tools | Search this Thread |
|
|