Go Back   Steve's Digicams Forums >

LinkBack Thread Tools Search this Thread
Old Aug 4, 2004, 9:01 PM   #1
Junior Member
lindy's Avatar
Join Date: Aug 2004
Posts: 2

I would like to of anybody's experience with the problem of deciding whether a slave or calbe supported external flash would be better for the Kodak DX6490. Also whehter I need to pay any attention to Kodak's suggestion of a voltage regulator. I have been thinking about either purchasing a Vivitar DF200, a DigiSlave flash for the slave unit or a cable supported sunpak flash. I am confused on which way I should go.

lindy is offline   Reply With Quote
Sponsored Links
Old Aug 4, 2004, 10:31 PM   #2
Senior Member
KCan's Avatar
Join Date: Jul 2002
Posts: 1,625


A standard external PC flash sync connector is available. The external flash will be signalled to fire each time the camera takes a picture, regardless of the camera flash settings. Accepts all standard external flashes, maximum 500V trigger voltage.

Technically, when you have a PC sync connector available, it's the best way to sync a flash. A 500V limit is more than safe , even old flash rarely exceed that trigger voltage. If you go for a cable connected flash, choose a safe one , with trigger voltage around 10 volts, you then are more than safe. If you choose a slave flash, well , it's safe of course, but with the inconvenient of a slave (learning mode, sensitive to other people flashes, etc…)
Check your flash trigger voltage here:

Consult also other threads here for more information of slaves flash for digicam.

KCan is offline   Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -5. The time now is 1:16 PM.