Go Back   Steve's Digicams Forums >

LinkBack Thread Tools Search this Thread
Old Jun 29, 2006, 9:00 PM   #1
Junior Member
Join Date: Jun 2006
Posts: 1

I have not been able to get my flash to work with my camera. Do I need to set something on my AE1 program when I want to use the flash? Please help
mars bars is offline   Reply With Quote
Sponsored Links
Old Jun 30, 2006, 10:07 PM   #2
Senior Member
Join Date: Jun 2005
Posts: 804

Mars, did it work before and now it doesn't? Or have the camera and flash been newly introduced? If you want the full control capabilities that the AE-1 is capable of with a flash, you have to have a flash that is "dedicated" to work with that camera. Even with a non-dedicated flash, though, you should be able to use the flash in manual or automatic (if the flash offers this mode) mode.

If the flash offers dedicated operation with that camera, it should work by just attaching it to the hotshoe or via the pc connector. If the flash is not dedicated but offers automatic operation, set the cameras shutter speed to 1/60 second and change the aperture ring on the lens from "A" to the aperture you have set on the flash.

Here's a link that will tell you a lot about flash operation with the AE-1 Program:


Hope this works for you!

granthagen is offline   Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -5. The time now is 8:17 PM.