Steve's Digicams Forums

Steve's Digicams Forums (https://forums.steves-digicams.com/)
-   Flash (External) (https://forums.steves-digicams.com/flash-external-52/)
-   -   Sunpak 383 with a Sunpak Adapter Bracket (w/ Built-in Slave) (https://forums.steves-digicams.com/flash-external-52/sunpak-383-sunpak-adapter-bracket-w-built-slave-46660/)

Cooly-o Feb 17, 2005 1:06 AM

I have a Coolpix 4300 (doesn't have a hot shoe) and want an external flash. Is there any way I can utilize a Sunpak 383?

I'd like to use it with a Sunpak Adapter Bracket with Built-in Slave ($25). I like this bracket since it could support a variety of flashes. Wouldn't this bracket add some versatility (can utilize on-board slave or depend solely on whatever hotshoe mountable productI mount on it).

If the Sunpak 383 doesn't need the bracket's on-board slave then what is a more worthwhile bracket to get (for a shoeless digicam) besides the $25 one I mentioned above?

Another good article (see downloadablezip file: Guisela's forth reply;which has great comparison info on flashes and cheap brackets noted at bottom left). Nevertheless, if I can pick up a used Sunpak 383 and the $25 bracket above wouldn't the bracket's slave feature be worthwhile (at least for a backup)??:

http://www.stevesforums.com/forums/v...mp;forum_id=53

Here's somecheap brackets:


After this link comes up Sort by "Price: Low to High":
http://www.bhphotovideo.com/bnh/cont...;Q=&ci=653

For example: General Brand "L" Flash Bracket for 35mm$12.95





Cooly-o Feb 18, 2005 12:51 AM

Can someonejust comment on whether the Sunpak 383 can be of some use with a shoeless camera? Would it's combination with a "built in slave" bracket (discussed above) make sense?

Also, are these tripod mounted brackets able to connect to a tripod? That is, do the brackets have another standard female threaded hole that would allow for a tripod mount?

Tom Overton Feb 18, 2005 1:34 PM

Hi;

I use a 383 with my Kodak Dx6490, which is "shoeless" but does have a pc connection. I have the$12 "L" bracket you mention in your post. Everything works fine for me. I don't know if this answers your question. I'm not familiar with the Coolpix line, but if it employs pre-flashes for metering or red-eye reduction, you may have trouble with a slave unit. You may want to copy your post to the Nikon forums.

Regards,

Tom, on Point Pelee, Canada
http://www.darwinonline.org/index.php?cat=11078


Cooly-o Feb 18, 2005 2:38 PM

Tom Overton wrote:
Quote:

You may want to copy your post to the Nikon forums.
Thanks, I did: http://www.stevesforums.com/forums/v...mp;forum_id=21

KCan Feb 18, 2005 7:13 PM

Cooly-o wrote:
Quote:

Can someonejust comment on whether the Sunpak 383 can be of some use with a shoeless camera? Would it's combination with a "built in slave" bracket (discussed above) make sense?
Yes it make sense, this bracket is made for this purpose

Cooly-o wrote:
Quote:

Also, are these tripod mounted brackets able to connect to a tripod? That is, do the brackets have another standard female threaded hole that would allow for a tripod mount?
Yes, all bracket that respect itself does have a tripod mount prevision :G

Usualy , there is a female thread under the locking knob (which has the male thread to go to the camera) or under the plate (Metz) or under the handle (my Vivitar bracket)

for ref, related thread:
http://www.stevesforums.com/forums/v...mp;forum_id=53




Cooly-o Feb 18, 2005 10:08 PM

An important and basic question:

If my Coolpix digicam tends to have red eye in it's pictures (regardless if it's redeye reduction is on) will a slave produced picture (slave will depend on my Coolpix's on-board flash which is 1 inchfrom my len's centerline) reduce the tendancy of redeye in thepicture? If so, how?

Wouldn't the Coolpix's on-board flash still be influencial in producing the redeye???

If it's true that red-eye reduction is not improved by these external flahes, is there an external slave flash that is able to "cover up" the on-board flashes (which tend to be too close to the lens' centerline; and in turn returns the retina reflection directly back into the lens).


All times are GMT -5. The time now is 12:16 AM.