Go Back   Steve's Digicams Forums > Digicam Help > Flash (External)

Reply
 
Thread Tools Search this Thread
Old May 26, 2004, 6:26 PM   #1
Junior Member
 
Join Date: May 2004
Posts: 1
Default

Is there any other external flashes that will work on the digital Rebel other than the cannon ones? I don't mind if they require to use them manually, would almost perfer that.

Local store said no, do to voltage (not sure what that is??) also would like to mount off camera on a bracket, which I believe would require a hotshoe.

Thanks for any help
irishman is offline   Reply With Quote
Sponsored Links
Old May 26, 2004, 8:38 PM   #2
NHL
Senior Member
 
NHL's Avatar
 
Join Date: Jun 2002
Location: 39.18776, -77.311353333333
Posts: 11,547
Default

Most automatic flashes will work with the Digital Rebel, all they need is for the center hot-shoe pin to short to the outer bracket casing to trigger... which is done by the camera @ X-sync shutter speed.

The flash will then detrmine the correct exposure based on the fixed aperture/ISO set on the external flash and controlled through its photoeye sensor. Vivitar, Sunpak and most Metz units have theses features

http://www.vivitar.com/Products/Flashes/flash.html
http://www.tocad.com/flash.html
http://www.metz.de/en/photo_electron...gital.140.html
NHL is offline   Reply With Quote
Old May 26, 2004, 9:15 PM   #3
NHL
Senior Member
 
NHL's Avatar
 
Join Date: Jun 2002
Location: 39.18776, -77.311353333333
Posts: 11,547
Default

irishman wrote:
Quote:
... also would like to mount off camera on a bracket, which I believe would require a hotshoe.
FYI with programmable built-in slave (ie wireless, and in case anyone worry about harmful voltages)

http://www.adorama.com/SUDCFA.html
NHL is offline   Reply With Quote
Old May 27, 2004, 4:14 PM   #4
Senior Member
 
Join Date: Feb 2004
Posts: 209
Default

Sunpak makes a full line of decent hotshoe mounted flashes. I have had several. Never had a problem with voltage. You can get a non-dedicated flash which just has a center pin that makes the flash fire (you control the settings manually on the back of the flash) or you can get a dedicated version (more pins on the connection so the camera can talk to the flash & transmit TTL stuff)

The Hot shoe is the thing on the camera where the flash attaches. What you need is an off-camera shoe cord. Basically an extension cord with a shoe on one end and a foot on the other
LTBerry is offline   Reply With Quote
Old May 28, 2004, 8:22 AM   #5
Senior Member
 
Join Date: Dec 2002
Posts: 5,803
Default

I'm no flash expert, but what people have said makes sense to me.

To comment on the voltage point, flash systems from different manufacturers seem to use different voltage values while communicating with the flash. It can be very bad for the flash if you miss-match the voltage between the flash & camera. You can fry your flash that way.

So it is an issue that you should worry about, you should be able to find one that works (especially from the comments above.)

Eric
eric s is offline   Reply With Quote
Old Jun 6, 2006, 5:06 PM   #6
Junior Member
 
JeffJeff's Avatar
 
Join Date: Jun 2004
Posts: 20
Default

I have a Canon Digital Rebel (350) as well and just purchased an non-oem flash.

I went with the Sunpak PZ40. It is compatible with Canon's eTTL system and can be mounted off-camera with Canon's hot shoe cord.

True its not Canon's 530 flash, but I needed to save some money and get a flash for my needs.



JeffJeff is offline   Reply With Quote
Old Jul 10, 2006, 5:12 PM   #7
Member
 
edwardr's Avatar
 
Join Date: Mar 2006
Posts: 44
Default

Replying to eric s

It's the other way around. The voltage refers to the flash trigger voltage. When the circuit is closed to trigger the flash, a voltage goes back to the camera. Old flashes often had very high voltages, a couple of hundred volts. In didn't matter in the old days of mechanical film cameras because they could withstand the voltage, but put one of those old flashes on a digital camera and you will fry the camera. It would be a shame to ruin a $700 camera because of a $30 flash. When buying a non-oem flash for a digital camera, make sure the flash is either dedicated to your particular camera model, or the flash says it is a "digital" flash.



On another topic, when it comes to slave flashes or slave triggers, make sure that they are designed for digital cameras, which fire a pre-flash. A non-digital slave will fire on the first flash it sees (one of your cameras pre-flashes) and not when the main flash is fired. So by the time your camera opens it's shutter, the slave has already fired and the light from the slave does not show up in the picture.
edwardr is offline   Reply With Quote
 
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



All times are GMT -5. The time now is 7:31 PM.