Go Back   Steve's Digicams Forums >

LinkBack Thread Tools Search this Thread
Old Nov 29, 2003, 5:56 PM   #1
Junior Member
boulder's Avatar
Join Date: Jun 2003
Posts: 8
Default NOISE in photographs?

In photospeak terms ....... what specifically is "noise"?
boulder is offline   Reply With Quote
Sponsored Links
Old Nov 29, 2003, 6:25 PM   #2
FrancescoC's Avatar
Join Date: Oct 2002
Posts: 37

In all electronical device you have a low level electrical current due to the intrinsic functioning of the circuit that cannot reduced to zero also in absence of the signal. In the camera sensors the electrical signal in produced by the light and is proportional to it. Normally at the minimum of the sensitivity (50 or 100 ISO) this low level signal is very low and it do not disturb the signal generate by the light in the sensor. In low light condition you need to increase the sensitivity of the sensor (ISO 400 or 800 or more). To do so you amplifie the output of the sensor and in doing this you amplifie the disturb that becames visible. This is called "noise".
FrancescoC is offline   Reply With Quote
Old Nov 30, 2003, 11:27 AM   #3
Senior Member
eric s's Avatar
Join Date: Dec 2002
Posts: 5,803

If you have done film photography think about it in terms of film grain.

eric s is offline   Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -5. The time now is 6:53 AM.