Go Back   Steve's Digicams Forums >

LinkBack Thread Tools Search this Thread
Old May 7, 2012, 3:11 PM   #1
Senior Member
lesmore49's Avatar
Join Date: Aug 2006
Location: Western Canada
Posts: 3,076
Default Putting a filter on a quality lens ?

I just bought a Pentax DA 70mm F 2.4 (Silver) Limited lens, about a week or so ago.

Those of you who know Pentax lenses , know this a fine portrait lens.

I have a 49mm B+W filter I would like to put on this lens, to protect it. B+W of course are very good filters.

Question :

The age old question...to do or not to do ....should I put a filter...clear or UV....on a lens ?

I have about 9 modern Pentax lenses and on every one of them...except my Pentax 10-17mm Fisheye...I have put a top quality filter on the lens. So far...I have noticed no difference in photo quality...with and without...filter.

The 10-17 of course...because of the design and the protruding front glass of the lens...makes it impossible to put a filter on this lens. But so far...almost 3 years later...I notice (touch wood) no scratches on the Fisheye.

So whaddya think ? Should, if I can, put a filter on my new DA 70 Ltd. ?

Thank you for your input.


Last edited by lesmore49; May 7, 2012 at 3:14 PM.
lesmore49 is offline   Reply With Quote
Sponsored Links
Old May 7, 2012, 3:47 PM   #2
Senior Member
TCav's Avatar
Join Date: Sep 2005
Location: Washington, DC, Metro Area, Maryland
Posts: 13,826

If you're going to use a filter, make it a multicoated filter. That kind of filter will have the least chance of degrading image quality.
  • The lens is the thing.
  • 'Full Frame' is the new 'Medium Format'.
  • "One good test is worth a thousand expert opinions." - Tex Johnston, Boeing 707 test pilot.
TCav is offline   Reply With Quote
Old May 7, 2012, 8:21 PM   #3
Senior Member
VTphotog's Avatar
Join Date: Mar 2005
Location: Extreme Northeastern Vermont, USA
Posts: 4,309

IMO, a good quality filter isn't going to cause problems with IQ except under special lighting conditions. Being in front of the lens objective, and flat, makes it more prone to flare, and washing out from off-angle light sources.
If you feel anxious about your lens without a filter, you will have that much less concentration for your picture taking. Go for what feels best for you.

VTphotog is offline   Reply With Quote
Old May 7, 2012, 8:41 PM   #4
Senior Member
Hawgwild's Avatar
Join Date: Mar 2006
Location: Pensacola, Florida
Posts: 3,589

Les, while I agree with Tom and Brian, I have to add that, in 40+ years of slr use, I have never used a filter for protection, and never regretted it. That has been my experience. Your life/shooting style may put your lens at more risk than mine, so that may be a consideration. All that aside, using a quality filter never hurts.
Always use tasteful words - you may have to eat them.
You cannot find knowledge by rearranging your ignorance.

My Flickr

Hawgwild is offline   Reply With Quote
Old May 8, 2012, 10:17 AM   #5
Senior Member
KulaCube's Avatar
Join Date: Sep 2010
Location: oakville, on
Posts: 491

When I did a lot of location shooting, never had anything hit the glass of my lenses thanks in part to good quality UV filters, but the number of times that the lens took an impact and was protected by a sturdy mounted metal lens hood...
Using a filter does mean one can clean the filter glass with a wee less care than the front element of the lens.
KulaCube is offline   Reply With Quote
Old May 16, 2012, 8:13 AM   #6
Senior Member
Mugmar's Avatar
Join Date: Jul 2005
Posts: 3,196

I don't always use a filter on my lenses, but if the conditions are very dusty, salty, or wet I will put it on just to make it easier to clean up afterwards. I did destroy a filter while photographing the geysers and mud pots, etc in Yellowstone. The acids coming out of the ground are very bad for a lens!!
MUG's Flickr

MAR's Flickr
Mugmar is offline   Reply With Quote
Old May 16, 2012, 12:23 PM   #7
Senior Member
ramcewan's Avatar
Join Date: Jan 2012
Location: New England, USA
Posts: 2,069

+1 to what others said. If you're going to have a chance of something getting on the lens, especially something corrosive like hot springs splashes (yikes Mugmar hope ya' didn't get any on ya!) or salt water spray the filter is a good barrier.
in my bag: e-m1, 7-14mm pro, 14-54mm mk ii, 50-200mm mk i, 70-300mm
in my pocket: e-pm2 lumix 12-32
ramcewan is offline   Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -5. The time now is 12:27 PM.