Go Back   Steve's Digicams Forums >

LinkBack Thread Tools Search this Thread
Old Feb 17, 2006, 7:05 AM   #1
Junior Member
andyrode's Avatar
Join Date: Feb 2006
Posts: 2

Which scan will produce the better result when printed: a scan of a 35mm colour negative or a scan of the developed print ( 3.5 x 5) of the same negative?
andyrode is offline   Reply With Quote
Sponsored Links
Old Feb 17, 2006, 9:29 AM   #2
sedges's Avatar
Join Date: Feb 2005
Posts: 42

If you have the equipment and software a scan of the negative would get the best results, especially if you are planning to print larger than the print you have in hand. Scanning color negatives involves dealing with the color cast(the orange color) of the film. Silverfast software deals with this easily if you know the brand and type of film. I have adjusted the color cast in Photoshop Elements as well, but it was more a trial and error process for me. I am using an Epson 3200 to scan positive slides mostly. Results are good.
sedges is offline   Reply With Quote
Old Feb 17, 2006, 12:20 PM   #3
Senior Member
slipe's Avatar
Join Date: Oct 2003
Location: Indian Rocks Beach, FL
Posts: 4,036

It depends on the scanner. If your scanner is at least 2400 PPI optical (2400 X 4800) and has a light in the lid for scanning slides or negatives you will probably do better scanning the negatives. The adapters that sit on the scanner glass don't do as well. I would assume you don't have a dedicated film scanner or you wouldn't be asking.

If the scanner has a light in the lid and comes with film and slide holders the software is set up to deal with the color cast on negatives. The differences between film brands is so close it is lost in the clutter of other subtle things that need correcting in Photoshop.

Scanners seem to accentuate film grain. Dedicated film scanners have a smaller light source and tend to accentuate it more, but a flatbed will also accentuate the grain. Scans of ASA 400 film almost always require noise reduction to look good. The Neat Image demo is considered freeware for non-commercial users and doesn't expire. If you plan on scanning ASA400 film you might want to learn to use it.

slipe is offline   Reply With Quote
Old Feb 17, 2006, 3:27 PM   #4
JockScott's Avatar
Join Date: Dec 2005
Posts: 83

A dedicated film scanner is considered the best way to go!, but since I don't have one, I have been scanning prints for years.

I usually scan 4x6 prints at 600 PPI (the max my scanner goes) and then crop, resize, etc.

So far, I've been happy with the results.

JockScott is offline   Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -5. The time now is 7:23 PM.