|
![]() |
|
LinkBack | Thread Tools | Search this Thread |
![]() |
#1 |
Senior Member
Join Date: Jan 2004
Posts: 368
|
![]()
:flame::whack:
So...I tend to shoot a lot of pics, even if doing portraits, with the beauty and low cost of digital, I fire off quite a few to ensure capturing some nice natural looking photos. The way I am going, I will reach the 120,000 mark in a couple of years or so....then what? Is it fairly easy and reasonably cheap to replace/repair? I also seriously question SOME dealers in the fact that it is quite easy for them to pass off a second hand camera as new, that way you have no idea how long the shutter mechanism has left!?!? Am I reading too much into this? Does it REALLY matter? And is the 120,000 figure realistic? I don´t remember ever worrying about this in the past with my trusty old Chinon cm4-s (1st SLR in the 80´s). But then I didnt have the internet with its forums to pull at my paranoia strings.....:-?Oh! Whoa-is-me..... |
![]() |
![]() |
Sponsored Links |
|
![]() |
#2 |
Senior Member
Join Date: Jun 2004
Posts: 301
|
![]()
I personally would not worry about it until it happens. By then, you may be looking for an upgrade, or more then likely, the camera may take far more shots then what is being advertised.
|
![]() |
![]() |
![]() |
#3 |
Senior Member
Join Date: Jun 2002
Posts: 769
|
![]()
A lot of digicams don't even have a mechanical shutter anymore, relying entirely on an electronic ccd shutter. That's why you do not hear a "click" (a real mechanical click) sound or feel vibration of the shutter. But the ones that do have a mehanica shutter would need to be sent back to the manufacturer for repair, and likely cost a hefty sum depending on the camera model. For instance, most companies will charge a flat fee of $300-400 for all major repairs for high-end models and DSLR's. At least that's my experience with Nikon, Olympus, and my friend had the same experience with Canon.
|
![]() |
![]() |
![]() |
#4 |
Senior Member
Join Date: Dec 2003
Posts: 1,676
|
![]()
I had an electronic Nikon camera for 15 years without shutter failure. I no longer own the camera, but it's probably still going strong. Yes, shutters can fail. Yours may never fail or it may. I wouldn't lose sleep over it.
|
![]() |
![]() |
![]() |
#5 |
Senior Member
Join Date: Jun 2002
Location: 39.18776, -77.311353333333
Posts: 11,599
|
![]()
Camera with LCDs or EVFs usually don't have shutter otherwise how would you see through them electronically?
![]() On high-end digicams there's a shutter, but it works in reverse and closing only after a picture is taken so that the charges are not disturbed while the CCD captured data are being shifted out. This shutter also is also used in slow exposure where the cameras take a 2nd shot with the shutter close and subtract out the dark frame for a relatively noise free picture at night. If the shutter wears out in theses digicam, you might just lose some picture quality ![]() |
![]() |
![]() |
![]() |
#6 |
Senior Member
Join Date: Jan 2004
Posts: 368
|
![]()
Thanks for your replies....feel better now.....
![]() |
![]() |
![]() |
![]() |
Thread Tools | Search this Thread |
|
|