Go Back   Steve's Digicams Forums >

LinkBack Thread Tools Search this Thread
Old Dec 12, 2009, 7:39 PM   #1
jennlynn130's Avatar
Join Date: Nov 2009
Posts: 53
Default Singing Christmas Tree question

My church is having their annual Singing Christmas Tree this year. It's where they set up "bleachers" and they are decorated with fake tree limbs (not sure what they're called LOL), bows, and lights. It's indoors and the lights will be turned off. Since I just got my first DSLR, I am learning all of the camera terminology and settings. I really have no idea if I can even take pictures because there will be other photographers there.

If I can, any helpful tips/advice? I could really use it. I have an Olympus E-600 with a 14-42mm and 40-150mm. It has an on-board flash and I have an old external one from a film camera.

What WB setting should I use? Should I use the external flash? Thanks so much
jennlynn130 is offline   Reply With Quote
Sponsored Links
Old Dec 12, 2009, 8:34 PM   #2
Senior Member
VTphotog's Avatar
Join Date: Mar 2005
Location: Extreme Northeastern Vermont, USA
Posts: 4,309

Indoors, with lights off, you will definitely need flash, and it is unlikely that the on-board flash will be powerful enough. You should first check in the Flash and Lighting forum on the thread regarding trigger voltage limits, to see if you can safely use your flash with your camera. If that checks out OK, your WB setting should be set to 'flash' or daylight (though sometimes using the 'cloudy' setting with external flash can give a bit more pleasing tone)
Try some practice shots. Is your flash going to give enough light at a wide enough angle for what you are doing at the distance you will be shooting from? If you will be reasonable close, the 14-42mm would likely be the lens you need. If farther away, the 40-150.
How well will your camera be able to focus in the lighting conditions? Again, practice shots will save a lot of grief.
Good luck, and remember to have fun.


edit: I meant the Flash (external forum) regarding trigger voltage. If the flash was meant to be used with your film camera's auto exposure system, it may not work consistently with your digital (assuming they are the same brand) An auto thyristor type flash could probably be used, but you will need to learn how to use it with manual settings on your camera.

Last edited by VTphotog; Dec 13, 2009 at 6:14 PM.
VTphotog is offline   Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -5. The time now is 6:27 PM.