Firmware Upgrade for the Digilife DDV-660 and Nisis DV6

[sgspirit]

CAUTION:Be sure you know what you're doing before attempting this! If the process fails, your camera will malfunction and must be sent in for repair. Don't use this procedure on any model camera except those specified in the Subject line.

Windows users, from:

http://www.nisisusa.com/update.htm

How to update Firmware for DV6

How to check your firmware version

Switch camera on
With your left thumb hold the REC/PLAY button down
With your right hand push the W button once
On your screen will be the F/W version
if its E1011 or A1104 or less you need to upgrade.

You need A1202 or E1202.

Firmware Upgrade

1. Click to download Firmware to your desktop.
2. Unzip to a folder to default, (which should be
desktop).
3. Format the SD card on the camera to FAT format.
(Start, mycomputer, Highlight DV6, file, format, fat,
quickformat.)
4.Open the Unzipped folder - inside will be 2 folders
5.Drag and drop "zburnT_C7.run.elf" first, then drag
and drop DCIM into the camera.

6.Unplug the camera
7.Turn on the camera.
8. The LED red light will twinkle for 20 seconds and
then become solid.
9. Remove battery.
10. Replace battery and restart.


After that is done format the card by
Press the Select button (surrounded by the up and down
arrows).
Press Up to Settings
Press the select button again.
Scroll down to format card
Press Select button again
HighLight Yes
Press select button

[vincentgian]

Help!!

I've installed "zburnT_C7.run.elf firmware on my digilife S-670. but the screen still remains blank. Is there any firmware of s-670?

Thanks

Vincent

[fishycomics]

SG Nice find

site is down, page error

Vincent.. welcome

A) the camera is i the correct camera for the firmware?

sg specifically mentions DV6, your's a c670

to me they do not match correct?

If andwhen sgspirit signs back on he may try t oexplain what you did wrong?

I cannot comment on this at all but If I read this right I own a Mustek, an aiptek, a Ispan and I should not attemt to load this to any of my cameras at all

If i have a camera that I have the orginal default and its upgrade, and wanted to fool around iwould still not try this. that said

I hope you can resolve this issue.

[vincentgian]

Thanks for reply,

I only want to know how can I get back o the original firmware of Digilife s-670 (alias Dragon 5).

Thanks again

Vincent:sad:

[fishycomics]

sound like Vincint did not listen to sg that's a NO NO correct?