Steve's Digicams Forums

Steve's Digicams Forums (https://forums.steves-digicams.com/)
-   Konica Minolta (https://forums.steves-digicams.com/konica-minolta-26/)
-   -   4.0GB MicroDrive for Dimage A2? (https://forums.steves-digicams.com/konica-minolta-26/4-0gb-microdrive-dimage-a2-84656/)

Oyster Mar 25, 2006 10:22 PM

I purchaseda Seagate 4.0 GB MicroDrive, but when I put it into the mediaslot of my A2, the message "cannot read card" appeared on the screen. I tried to format the card, but the camera would not let me.

I then went to the Seagate website, and it said that their MicroDrive is compatible with the A2 if it has camera firmware 1.13 or 1.14, drive model ST64022C-RK or ST64022C-RK, and drive firmware 3.01or 3.02.

I went to the KM website http://kmpi.konicaminolta.us/eprise/...oftwareResults

but could not locate the drive firmware updates. I already have the 1.14 camera firmware installed. I checked theinstruction manual, and it does not mention anything about drive models. Can someone provide insight on this?

Thanks,

Oyster :?









amazingthailand Mar 26, 2006 2:56 AM

Try formatting the card in your computer (FAT32) and see if the camera can then recognize it. If it does, do an incamera card format and then you're off and running.

Oyster Mar 27, 2006 6:13 PM

amazingthailand,

I purchased the microdrive at Fry's and brought along my A2 to make sure it worked. When it didn't, I immediately applied for a credit. The sale is over (it was $80), so I'll take you advice and try it the next time it goes on sale.

Thanks,

Oyster


All times are GMT -5. The time now is 6:04 PM.