|
![]() |
|
LinkBack | Thread Tools | Search this Thread |
![]() |
#1 |
Junior Member
Join Date: Jan 2005
Posts: 2
|
![]()
Hi everyone!
Here is trouble with my Z3. Often, wheni start Z3, and when i startdo a focus (press short),the picture on LCD getting lost. There is a screenshot how it looks like: http://dopusk.narod.ru/KM-Z3-Screen.jpg but, if press button futher to shot a picture, then picture is OK (may be focus on this picsare not good, but anyway...) and after it isagain the same situation on LCD. If i do a video then it looks like: http://dopusk.narod.ru/KM-Z3-video.avi This bug was from the begining, when i bought camera. And in 90 percent times it disapearing if i switch off and switch on camera. I think that it is a problem with CCD. Does anybody have the same probs? Your opinions about that bug? What do you think? |
![]() |
![]() |
Sponsored Links |
|
![]() |
#2 |
Member
Join Date: Dec 2004
Posts: 43
|
![]()
Hi,
I haven't had this problem, but have you ever upgraded the firmware? A problem like this could arise if the firmware installed weird. Also it sounds like the camera was defective from the start. So I would call Minolta about this problem, and tell them that it happens like 90% of the time. If they don't do anything (but I think they will) then I would contact the store you bought it from. Seeing that it sounds like they sold you faulty merchandise. Although I think Minolta should be able to help you out. Especially since you didn't do anything to the camera. Hope that helps you. Flame |
![]() |
![]() |
![]() |
#3 | |
Senior Member
Join Date: Dec 2004
Posts: 292
|
![]()
Minolta_nut wrote:
Quote:
Max |
|
![]() |
![]() |
![]() |
#4 |
Junior Member
Join Date: Jan 2005
Posts: 2
|
![]()
Thanx, folks.
That was on both firmwares 1.01e and 1.02e (latest one). Gonna contact KM service centre. Thanx once more. Try to keep you informed about that. |
![]() |
![]() |
![]() |
Thread Tools | Search this Thread |
|
|