I know, sounds silly, but the package doesn't say. I need to get a PC card adapter and found both Type I and combo Type I/II, with the latter being twice a expensive. Can I assume a Type one PC card adapter is what I need to buy?

type II

Type 1 cards are thin. Type 11 are thick. A Microdrive is type 11, so to be future proof consider the type 1/11 reader.

Since I don't have a Microdrive to compare it too, define thin (not that I don't trust the previous post by sjms, but it already looks pretty thin to me .

Yes, but you have a pc connected to the internet and the answer from a Google search is here: If you don't trust this info, there are about 31,000 other sites to look at:


http://www.compactflash.org/faqs/faq.htm#What_is

http://www.compactflash.org/info/cfinfo.htm

http://www.google.co.uk/search?as_q=...h=&safe=images

Yea, I know it's poor form to reply ones own post but...

According to the CF description within Steves:

http://www.steves-digicams.com/flash_memory.html

The standard 1GB CF card from Sandisk is a Type I but in the picture at the bottom it looks identical in form factor as the Microdrive. Sandisk web site doesn't even mention Type I or II cards that I could find.

Anyone else as confused as I am? :?

A PC card (PCMCIA) slot has 3 types: type I, type II, and type III all identical size except for the thickness with type I being the thinnest, and Type III the thickest (ie some PCMCIA hardisk).

This is not to be confused with CF-I and CF-II, also identical in size except for the thickness, again with CF-II the thicker one. Most CF flash cards today are of CF-I type (3.3mm thick), the microdrive and larger/older flash cards can be of CF-II type (5mm thick). Sjms is right, it's a type II. Although a PC card type I adapter would have work just as well, but the thickness of the CF card could change the combination to a type II PC card because of the thickness of the CF card(ie 5mm vs 3.3mm) and not the PC card adapter in itself! :?
http://www.compactflash.org/faqs/faq.htmThey are all electrically identical, so if the adapter/CF combination can mechanically slide in your laptop slot, they would work!!! 8) 8) 8)
http://www.stevesforums.com/phpBB2/v...t=7130&start=0

voxmagna, Don't mean to sound rude because I appreciate all efforts to help, but your post did not explain anything. It talks about PC card standards and pin-outs. I could not find where it tells me whether or not the Sandisk 1GB card is a CF-1 or CF-2 card.

This is important because I need an adapter now, and the only one one avialable is a Type I card. On the other hand, I would have have to wait on a Type I/II card, but if I don't need it....hence the dilemmna.

Question, is the adapter package talking about PC Card Type I or II or the CF card? Now I am doubly confused.

The Sandisk 1G flash is CF type I!

What does it says on the package? either way it would work. A PC Card type I would have worked in type II (and type III also), just because it's thinner. The converse is not true however since their size are thicker (ie a PC card type III would not fit a type I slot!!!).

The thinner Laptops are type I only with two (2) type I slots. You can still insert a type II PC card but it would encroach on the other slot depending how the slots are oriented, hence only one type II can be inserted or two type I instead (and are specs as such, either the top or bottom of this type I slot is type II compatible)... Still confuse?

Adapter just said Type I - I did not know if it was talking about the CF type or the PC Card type. I have since found pictures of the two types of CF cards nad confirm what you already knew.

Thanks for your patience.

PS My 7Hi has been shipped! WooHoo!