Go Back   Steve's Digicams Forums >

LinkBack Thread Tools Search this Thread
Old Aug 19, 2006, 12:59 PM   #1
Junior Member
sweingast's Avatar
Join Date: Aug 2006
Posts: 3

I understand that the typical television in 4:3 and your 6x4 snapshot is 3:2.

My five meg camera goes down to 4.5 megs at 3:2.

Our pictures are used as much for video slide shows as they are for 6x4 prints.

So which setting should I use?
sweingast is offline   Reply With Quote
Sponsored Links
Old Aug 19, 2006, 1:18 PM   #2
Senior Member
Sintares's Avatar
Join Date: Jul 2005
Posts: 647

I always shoot at the most pixels and crop later.
Sintares is offline   Reply With Quote
Old Aug 19, 2006, 2:12 PM   #3
Senior Member
amazingthailand's Avatar
Join Date: Aug 2002
Posts: 851

I choose the format offered by the camera I am using. That is: I always shoot at the higest resolution the camera offers.

By the way, television is going 16:9, so 4:3 is now an old format.
amazingthailand is offline   Reply With Quote
Old Sep 6, 2006, 12:25 AM   #4
Senior Member
Morag2's Avatar
Join Date: Jun 2006
Posts: 820

I always shoot 3:2 because that is what most printing is done in (where I live anywhere, bigger cities probably have stores offering more options for print size).

While cropping is possible at the highest resolution, I often fit an image to fill the full frame, meaning that cropping it will lose some important part of the image! I used to shoot 4:3 (5MP mode for me) but after my first few prints, I decided to switch to 3:2 (only 4.5MP but worth the loss to me)
Morag2 is offline   Reply With Quote
Old Nov 28, 2006, 9:15 PM   #5
Senior Member
dr_spock's Avatar
Join Date: Nov 2006
Posts: 879

If I plan to print a 4x6, I'll use 3:2. Otherwise, I leave it at 4:3 for more pixels on my P&S. 99% of the pictures I take never get printed.
dr_spock is offline   Reply With Quote
Old Nov 29, 2006, 8:44 AM   #6
Senior Member
BillDrew's Avatar
Join Date: Jun 2002
Location: Hay River Township, WI
Posts: 2,512

I don't have the choice: now shooting with a 3:2, used to shoot with a 4:3. I never really knew how I was going to use the image if it is printed- (most likely for the web where it can be any aspect ratio). So with the 4:3 ratio camera I aimed to leave some "cropable" areas along the long edges. That allows it to be cropped to 3:2 without cutting something important. With a 3:2 ratio, some slack has to be left on the short edges to allow cropping to 8x10".

So get used to one format and allow some slack on the approriate edge. Don't switch back and forth - doing that would confuse me for sure. That means using the 4:3 since that gives the most pixels so less is lost by cropping to the desired format.
BillDrew is offline   Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -5. The time now is 11:47 AM.