Go Back   Steve's Digicams Forums >

LinkBack Thread Tools Search this Thread
Old Dec 19, 2009, 8:17 AM   #1
Junior Member
pnut's Avatar
Join Date: Dec 2009
Posts: 29
Default Explain the benefit of using "raw" mode

I am a tradtional P&S user, and doing research on nicer, more complicated cameras.

What is "raw" mode and why would I want to use it? I see it takes up alot of memory compared to JPEG fine.
pnut is offline   Reply With Quote
Sponsored Links
Old Dec 19, 2009, 9:13 AM   #2
neilcrichton's Avatar
Join Date: Aug 2009
Location: Claresholm, AB, Canada
Posts: 79

Your camera does a lot of processing of the image before recording it on the memory card. Colour, brightness, contrast, noise, sharpness, etc., are all adjusted as the camera sees fit. When it is saved on the card as a JPEG, the image is compressed, losing some of its quality in the process.

If your camera can shoot RAW, the in-camera processing is by-passed, and the image is stored on your card exactly as it appeared on the sensor. Also, there's no compression, so the image is the best quality your camera can produce.

You then post-process the image in a RAW converter, where you can adjust the characteristics of the image as you please, before saving as a JPEG, TIFF, etc.
neilcrichton is offline   Reply With Quote
Old Dec 19, 2009, 9:44 AM   #3
Senior Member
FaithfulPastor's Avatar
Join Date: Jun 2004
Posts: 657

I'm relatively new at RAW, but here's what I've found so far.

White balance is a messy at times. For example, say you're shooting a person who is on a theater stage. And the stage lighting is yellow. The yellow light shining on a Caucasian actress makes her skin look yellow and sick. This type of effect is described as the white balance being off. If you're not shooting in RAW, then you're likely to do some in camera changes to minimize the funky skin color and you're probably going to get to do some Photoshop changes as well.

I've learned that fixing this skin color issue has become much easier when shooting in RAW. I'm not saying you can't fix it in Photoshop. But I've been amazed at how much easier it is to fix in RAW. Not only does it fix the skin color, it fixes the other colors as well while you're fixing the skin color issue.

The program I use to do this is Lightroom II. I'm a recent convert of Lightroom. IMHO, it's a headache to learn because it truly works differently than other photo editors. But once you get past the initial hurdle, it becomes pretty straight forward.

The other advantage of Lightroom is that you can "batch" process. Say I shot 100 photos of a theater presentation. I can adjust the white balance for one, and then chose to clone those changes to all the other shots that were taken under similar lighting. Think that doesn't save you time and effort?!
FaithfulPastor is offline   Reply With Quote
Old Dec 19, 2009, 11:18 AM   #4
Senior Member
TCav's Avatar
Join Date: Sep 2005
Location: Washington, DC, Metro Area, Maryland
Posts: 13,826

Shooting in RAW is great if you've got the time and storage capacity, and you're short on opportunity.

For all the reasons neilcrichton and FaithfulPastor mentioned, and a few more no doubt, RAW is a good way to go. But shooting in RAW requires you to do some post processing, whereas JPEG images can be good to go right out of the camera. Also, since RAW files are larger than JPEG files, the rate of continuous shooting is slower, and transfering images from camera to computer takes longer, and they take up more space on the flash memory card and on your computer.

But if you've only got one chance to get the shot right, shooting RAW will let you correct for some difficiencies in the original image that would be tedious if not impossible with a JPEG image.
  • The lens is the thing.
  • 'Full Frame' is the new 'Medium Format'.
  • "One good test is worth a thousand expert opinions." - Tex Johnston, Boeing 707 test pilot.
TCav is offline   Reply With Quote
Old Dec 19, 2009, 11:22 AM   #5
Senior Member
interested_observer's Avatar
Join Date: Jul 2006
Location: Tumbleweed, Arizona
Posts: 1,381

Some cameras also offer RAW + JPG. In this mode, the camera is storing both the unprocessed RAW and the processed JPG, and you have less room on your memory card for images. There is also an advantage, whereby if you want the camera processed JPG and the unprocessed RAW stored on your PC for later reference or processing. It is just another option, that works for some and for others offers nothing.
interested_observer is offline   Reply With Quote
Old Dec 19, 2009, 3:52 PM   #6
Senior Member
VTphotog's Avatar
Join Date: Mar 2005
Location: Extreme Northeastern Vermont, USA
Posts: 4,309

Raw mode requires at least one extra step in order to get an image you can view on screen or print. A Raw converter must be used to turn the raw file into a viewable image file, such as jpg, or tiff. Raw converters give you many options on how to process your picture, including noise reduction, sharpness, WB, and exposure. Some will allow cropping, and tone mapping as well. In many, if not most, cases, this precludes the need for using an editor, such as Photoshop. It does take more time on your part though.
For casual use, such as family gatherings and when I'm just out and about with my camera, I usually have it set to jpeg, since it is easy enough to change if a special shot appears. Some cameras now have dedicated buttons for switching to raw in circumstances that call for it.

VTphotog is offline   Reply With Quote
Old Dec 20, 2009, 2:14 AM   #7
Super Moderator
peripatetic's Avatar
Join Date: Nov 2004
Posts: 3,599

Start with this:

My gallery
My X100 blog
peripatetic is offline   Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -5. The time now is 2:54 AM.