Go Back   Steve's Digicams Forums >

LinkBack Thread Tools Search this Thread
Old Feb 2, 2007, 8:16 AM   #1
Dig's Avatar
Join Date: May 2003
Posts: 99

I noticed a big black spot on some of my photos recently and lifted the mirror as per the instruction book to see the sensor.

Low and behold there was a big dust goober on the bottom left corner of the sensor. I have a hard time understanding how it got there since I have not removed the lens since I first installed it on the camera, but non-the-less, there it is.

Any recommendations on the safest way to remove it? I wanted to stick my finger in there and try to get it off with the tip of my fingernail but my friend stopped me.

Anyway, the manual suggests blowing it off. Are they talking about canned air or one of those little squeeze blowers?

Dig is offline   Reply With Quote
Sponsored Links
Old Feb 2, 2007, 9:02 AM   #2
Senior Member
Greg Chappell's Avatar
Join Date: Sep 2003
Location: Dallas, Texas USA
Posts: 6,589

You never want to use canned air to blow particles off your sensor. The force can be too much and you could wind up ruining your sensor. Any manual that mentions "blowing the particles off" is referring to a blower bulb you handsqueeze. Hold the camera with the lens opening facing down so what ever you dislodge falls out and doesn't just fly somewhere else and give the bulb a quick squeeze to create a soft puff. Do it a few times, but don't go too far inside the lens mount with the blower. You don't want to accidently hit the sensor. There are also sensor swabs that are sold with a liquid you can use to clean the sensor, but you want to try & get whatever's on there off first with air to avoid possibly scratching the sensor with the swabs.

Remember, that sensor is the most expensive part of your camera. Any of the above could damage it if done incorrectly. No method used by people to clean their own sensorsis fool proof, so be careful.
Greg Chappell is offline   Reply With Quote
Old Feb 2, 2007, 11:02 AM   #3
Jacques_T's Avatar
Join Date: Sep 2006
Posts: 30

I would suggest if you cannot get it off with a bulb blower take it to a Nikon cert. outlet / for cleaning. It's going to cost a lot less than a new sensor!!

Good luck, hope you can get it sortedwithout taking it in for servicing!

Jacques_T is offline   Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -5. The time now is 11:02 PM.