Steve's Digicams Forums

Steve's Digicams Forums (https://forums.steves-digicams.com/)
-   Olympus (https://forums.steves-digicams.com/olympus-28/)
-   -   4040 Drive problems (https://forums.steves-digicams.com/olympus-28/4040-drive-problems-3749/)

adalem Oct 19, 2002 8:01 PM

4040 Drive problems
 
I purchased a 4040 about a month ago after using a 2020 for 3 years. Everything works good except I cannot configure the drive menu for sequential, AF sequential or BKT. I have tried every conbination of menu selections, read all the literature I have. Either I'm missing something simple or the camera software is faulty. Has anyone else had this problem?

Mike_PEAT Oct 19, 2002 9:23 PM

You can't use those features if you have these cameras set to TIFF due to memory constraints. You need to select a JPG image setting.

adalem Oct 21, 2002 5:58 PM

Today, after playing with the camera a while, again, I found that disabling the selection "noise reduction", allows access to all drive options. I'm not sure of the logic, but it now works. Thanks, Mike_PEAT for your input.


All times are GMT -5. The time now is 4:11 PM.