Go Back   Steve's Digicams Forums > Digital SLR and Interchangeable Lens Cameras > Olympus dSLR

Reply
 
Thread Tools Search this Thread
Old Aug 19, 2008, 6:28 PM   #1
Senior Member
 
Join Date: Jun 2004
Posts: 477
Default

If you intend to mount Pentax K mount lenses on your 4/3 mount Olympus using a PK - 4/3 adapter, make sure you remove the flange that protects the aperture stop down lever first.

If you don't, you will damage the electrical contact pins on the camera. Worst case, it could break off two pins.


dnas is offline   Reply With Quote
Sponsored Links
Old Aug 20, 2008, 7:19 AM   #2
Senior Member
 
Join Date: Jun 2004
Posts: 477
Default

Damage to flange, which should be removed by unscrewing the three screws, BEFORE attaching the PK lens.




Damage to the pins on the camera. When it comes to trying to remove the lens, the flange gets caught on the pins (I guess when the lens went on, the flange pressed these two spring loaded pins down, so it was no problem at the time). This stops the lens from being removed, because the pins are no longer pressed down. I'll have to remember to remove the flange if I buy a PK - 4/3 to use with any of my PK lenses.

dnas is offline   Reply With Quote
Old Aug 20, 2008, 9:00 AM   #3
Senior Member
 
zig-123's Avatar
 
Join Date: Dec 2006
Location: Cape Cod, Massachusetts
Posts: 5,145
Default

Looks like you were very fortunate not to be faced with a very costly repair to your camera. As it is, you can clearly see the evidence of significant sideways pressurehaving been applied to the sensor pins resulting in thehole openings in the bodybeing deformed.

Thanks for posting as it is a good warningto everyone contemplating the use of non OM or non ZD lenses that thereare risks involved.

Zig


zig-123 is offline   Reply With Quote
Old Aug 20, 2008, 11:55 AM   #4
Member
 
signalsoldier's Avatar
 
Join Date: May 2008
Posts: 99
Default

I had to do the same for my Vivitar ....I just covered the lens really well and with one snip of the metal sheers and it was a wrap!
signalsoldier is offline   Reply With Quote
 
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



All times are GMT -5. The time now is 11:53 PM.