Go Back   Steve's Digicams Forums >

LinkBack Thread Tools Search this Thread
Old Apr 26, 2013, 6:34 AM   #1
Junior Member
Hightower1's Avatar
Join Date: Apr 2013
Posts: 2
Default Auto focus problems Panasonic DMC-FZ38

Iíve had my DMC-FZ38 for the last 2 years working fine.

I started messing with some of the setting and now my auto focus wonít work or is too fast and picture comes out blurry.
When I go to take a photo,
I give first pressure (this would automatically focus) green dots and green squares would appear when focused and it would beep to let you know)

I could then continue to take the photo even after a couple of seconds.

Now when I try to take first pressure it beeps and just takes the photo.

I have tried factory reset.
AF/AF&/MF etc
iA setting on the camera.
And I read the manual!

Any help please
Hightower1 is offline   Reply With Quote
Sponsored Links
Old Apr 26, 2013, 8:47 AM   #2
Senior Member
Raghu's Avatar
Join Date: Nov 2004
Location: Ambattur, near Chennai, India
Posts: 3,656

I have (rather, had - it is in the service centre now pending repairs) a FZ 28 and if FZ 38 is more or less the same, I guess you have meddled with the Auto Focus mode in the settings menu. You say previously you were seeing green squares, I presume you are not seeing them now, which means you have set the focus from multi-point focus to probably spot focus. Try resetting the auto focus to multi-point.
Raghu is offline   Reply With Quote
Old Apr 30, 2013, 4:48 PM   #3
Junior Member
Hightower1's Avatar
Join Date: Apr 2013
Posts: 2

Thanks but I have tried all the autofocus settings.

Is there a way to master reset the whole camera.
I have tried resetting the camera but this did not change any settings
Hightower1 is offline   Reply With Quote
Old May 1, 2013, 10:39 PM   #4
Senior Member
Ozzie_Traveller's Avatar
Join Date: Jan 2011
Location: Australia, New South Wales central coast
Posts: 3,518

G'day mate

Maybe you'll need to remove the batteries long enough for the camera to lose all settings. The time varies from brand to brand - anything from 2 days to 7 days
Good luck!!

Regards, Phil
Has Lumix mirrorless & superzoom cameras and loves their amazing capabilities
Spends 8-9 months each year travelling Australia
Recent images at http://www.flickr.com/photos/ozzie_traveller/sets/
Ozzie_Traveller is offline   Reply With Quote
Old May 2, 2013, 4:13 AM   #5
Senior Member
BBbuilder467's Avatar
Join Date: May 2012
Posts: 307

You can reset the camera to default by switching to a PASM mode and open the menu to the set-up menu. It should say "Reset". There is also "Reset Number", but don't do that. It will change your picture number.

I'd download the pictures from the SD card and "format" in-camera at the same time. I've had un-formatted cards cause some real quirky things at times.

I doubt if anything you changed could have had anything to do with the IA mode. What's available in the IA main menu and quick menu are about all that affect IA mode. Even the 4-way defaults to IA when in that mode.

My FZ28 does seem to have a "soft" shutter button. I had to roll/slide my finger over it or I would trigger the shutter and miss the half-press when I first got it. It still has an awkward feel to it. If I use the tip of my finger, I'll trigger the shutter and miss the half-press.
BBbuilder467 is offline   Reply With Quote
Old May 15, 2015, 2:03 AM   #6
Junior Member
DmitryChulkov's Avatar
Join Date: May 2015
Posts: 2
Default info

see here http://mans.io/
DmitryChulkov is offline   Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -5. The time now is 6:47 PM.