Go Back   Steve's Digicams Forums >

LinkBack Thread Tools Search this Thread
Old May 23, 2009, 12:11 AM   #1
Junior Member
jcardinal's Avatar
Join Date: May 2009
Posts: 1
Default DMC-FZ28 Indoor shots fuzzy

I am a novice user and am having great difficulty getting clear pictures of my infant indoors. Most of my pictures come out fuzzy. Any ideas on what the common mistakes are and what I should be trying in order to get clear pictures?
jcardinal is offline   Reply With Quote
Sponsored Links
Old May 23, 2009, 8:01 AM   #2
JimC's Avatar
Join Date: Jun 2003
Location: Savannah, GA (USA)
Posts: 22,378

The most common issue is motion blur from subject movement because indoor lighting is much dimmer to a camera than it appears to the human eye. So, you'll end up with very slow shutter speeds that aren't fast enough to freeze subject movement (and you can run into the same issues with blur from camera shake).

Your best bet is to use a flash indoors.

If for some reason you can't use a flash, you'll want to increase your ISO speed. Each time you double the ISO speed, the camera can use shutter speeds twice as fast for the same lighting and aperture. However, unless your subject is relatively motionless, you may find that shutter speeds may still be too slow for the desired results. If you don't zoom in as much, that can help, too (as your lens is going to be brightest on the wider end of it's zoom setting).
JimC is offline   Reply With Quote
Old May 23, 2009, 10:59 AM   #3
Senior Member
Tullio's Avatar
Join Date: Jan 2006
Posts: 7,370

There is a similar thread going on here where a lot of information/suggestions have been presented. There are several different opinions on which technique works best in low light conditions. As Jim stated, using flash most likely will eliminate the problem. If you find that the flash does not have enough reach, increase the flash output (power) and/or the ISO to 400. For all other possible options, check the other thread.

Tullio is offline   Reply With Quote
Old May 26, 2009, 10:10 AM   #4
Senior Member
mtclimber's Avatar
Join Date: Oct 2005
Location: Oregon, USA
Posts: 18,143

Another option would be to use a slave flash like the Digimax 3000 and bounce the needed light from either a ceiling or a wall. It really does work quite well.

Sarah Joyce

Last edited by mtclimber; May 27, 2009 at 11:15 PM.
mtclimber is offline   Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -5. The time now is 8:42 AM.