Go Back   Steve's Digicams Forums >

LinkBack Thread Tools Search this Thread
Old Jun 8, 2012, 7:08 PM   #1
Senior Member
Join Date: Dec 2010
Posts: 278
Default FZ35 - Area-1 vs. Area-1 High Speed

I read the manual, but believe I am missing something basic. What is the difference between these two modes of focus?

The butterfly season will be here soon. Small, white butterflies have already arrived (cabbage butterflies, by some accounts). They are not interesting, nearly all white, but provide a glimmer of hope that better subjects are not far in the future.

I've tried several sessions with these cabbage "whites." In years past, I've seen many of them, but they are VERY difficult to catch. They are too skitterish to remain for a close shot. However, this Spring, they must be really taken with nectar of a particular plant. They are much more willing to remain in place for me to get a shot than I recall from 2011.

However, getting focus is a problem. I have tried Spot, Area-1, and Area-1 HS. I thought the HS setting would enable the camera to get focus more quickly. Time to get these shots is very limited, so giving the camera a couple of seconds to settle is expecting much. I am not seeing any change from one setting to the next. Should I be expecting better focus with small time period with HS?

I have used A setting (with AF Macro), as well as Macro/flower. I have gotten some better shots than 2011, but would like to get a better "hit" rate.

Any suggestions or comments regarding HS?

roger53 is offline   Reply With Quote
Sponsored Links
Old Jun 8, 2012, 9:41 PM   #2
Senior Member
saly's Avatar
Join Date: Mar 2010
Location: near Los Angeles, CA USA
Posts: 4,764

Roger, I only use Spot focus setting when I'm shooting closeup (with LT55). So I'm afraid I can't help you.....

Panasonic FZ150, FZ35 and GF1; Nikonos V when underwater

~~Art is in the eye of the camera holder~~
saly is offline   Reply With Quote
Old Jun 9, 2012, 12:37 AM   #3
Senior Member
happy_peasant's Avatar
Join Date: May 2006
Posts: 2,048

What I found with my FZ35 was:
- In any setting tele macro is slower to focus than the same setting without tele macro.
- The one area focus with the small point was the best general purpose focus.
- The continuous auto-focus mode is hardly worth using due to hesitation when you try to actually focus while pushing shutter button down.

As far as high speed focus, that might help you with flighty butterflies and birds. I found it worthless for moving targets, but what I did use it for was quick shots. Pushing the shutter button all the way down to take a shot as soon as the camera is pointing at the subject without any of that halfway down and then the rest of the way like the book says.

Hope this helps.
FZ7 and FZ35 - Deceased, FZ18 - Given daughter, FZ150, E-PL1 and G3 - In use.
happy_peasant is offline   Reply With Quote
Old Jun 9, 2012, 2:43 PM   #4
Senior Member
eysha's Avatar
Join Date: Jun 2010
Location: uk
Posts: 1,213

That's interesting Steve, i am going to try the high speed and see what happens.

Panasonic FZ200 + Panasonic FZ38 + Macro & Tele Kit (DMW-LC55 + DMW-LT55 + DMW-LA5) Panasonic FZ330.
eysha is offline   Reply With Quote
Old Jun 15, 2012, 7:37 PM   #5
Senior Member
Join Date: Dec 2010
Posts: 278

I'm sorry I have not reported back. Thanks for the replies.

After seeing the "Bug Mix" (by catalex..), I just about hung up my camera. I know that I will never reach that level of shooting.

However, I went back to trying many different schemes. I don't any difference between Area-1 and Area-1 HS. I have found that spot focus seems the best. I also experimented with Q-AF and C-AF, but without a discernible difference. I have tried AF-Macro/flower setting, as well as A setting (at 2.8).

The last couple of days, I've tried a new scheme, and have found the highest percentage of "hits." I've tried AF/AE lock. All of my shots recently have been of working bees, typically about 3/8" long. My goal is to get a distance of about 1 1/2", lens to subject. The bees are not very compliant with regard to hanging around for me to get the shot off. I have watched them enough now to understand their patterns of working a flower, so get myself into a position where I expect them to be. With the AF/AE lock, there is no lag -- get the position, and fire.

I think I might work with just AF. Does anybody know if AF requires the longest lead time, with AE taking a brief instant?

My conclusion at this time is that I am better at getting the right position, with a preset focus, than to expect the AF to get settled before firing the shot. Not waiting for the lead time is very helpful in getting the shot at all. The bees only settle for a brief instant. Yes, if I get the locked setting right at 1 1/2", then I have to be at the same 1 1/2" for the shots. I'm not sure how to know if the lock is good when it is set. It appears the lock button is just like the shutter button, except the shutter isn't exercises. The focus and exposure procedures are the same for both cases. Does anybody know if I am right about this?

I am still working through the images. I will choose a few to post soon.

P.S. Yes, I have several BIF images -- not because I was intending to shoot them, but because the departure of the bee was quicker than my trigger finger! However, none of the BIF images really have good focus of the bee.

Does anybody else have experience in using AF/AE lock for these situations? If so, what have you learned?
roger53 is offline   Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -5. The time now is 7:47 AM.