Steve'sDigicams

digcamfan · Feb 9, 2006, 10:30 AM

Moon shots

Uncropped - just a little bright/contrast PP

Cropped, enlarged with bright/contrast/sharp/edge smooth PP in PSP 8

genece · Feb 9, 2006, 11:00 AM

Very nice... some of you guys must have steady hands.

treed · Feb 9, 2006, 12:38 PM

Quite nice indeed. Looks similar to my moon shot. What shutter speed did you use?

digcamfan · Feb 10, 2006, 6:45 PM

Sorry, I do not know...

I would estimate 1/125 to 1/500.

ISO was Auto.

Ken Rogers · Feb 10, 2006, 10:46 PM

I'm amazed by every moon shot I see on this forum. I can't seem to achieve the same results with my camera. Here I used my FZ5 w/TCON-17 at 12x zoom, aperture 5.6, shutter 1/125, "spot focus" selected. I used a tripod with 2-second shutter delay. I used focus magic to correct a 1-pixel focus blur, and a light application of unsharp mask with Photoshop. This is a 100% crop. My moons seem to lack detail. This shot was taken from an 80-foot high tower in windy conditions.

squirl033 · Feb 10, 2006, 11:30 PM

Ken, what OIS mode did you use? Panasonic recommends using OIS mode 2, or turning it off entirely, when using a tripod. i set my FZ20 for mode 2 and just leave it there. you had all your settings about right, but for some reason, it didn't work out.there's quite a bit of noise, and it looks like the sharpening wasway overdone, perhaps in an attempt to get some detail. it trying to get some detail. also, there's a lot of CA ("purple fringing"), which can sometimes happen with the TCON-17 under high-contrast conditions. i wonder if maybe the wind was more than the tripod could handle... i can't think of anything else, since your settings were pretty much correct...

Ken Rogers · Feb 11, 2006, 12:57 AM

OIS 2 was used. I must confess that this was shot through a window, 10 feet from the camera. I tried to do it outside, but winds were gusting over 30 mph, and was making things impossible.

squirl033 · Feb 11, 2006, 1:12 AM

that window didn't do you any favors, i'm afraid...

you had the settings right, though. try it again from outside, on a calm night, and see what you get. here's the kind of detail you should get with that set-up... this was taken at almost the same settings as yours - f5.2, 1/125, ISO 100, OIS mode 2- but shot from a monopod at full 12x zoom,with TCON-14Bconverter. the coloration is because the shot was originally taken at dusk, and when i darkened the sky, the moon turned kinda brown...

http://img.photobucket.com/albums/v3...3/P1050302.jpg

Feb 10, 2006, 10:46 PM	#5
Ken Rogers Member Join Date: Aug 2005 Posts: 78	I'm amazed by every moon shot I see on this forum. I can't seem to achieve the same results with my camera. Here I used my FZ5 w/TCON-17 at 12x zoom, aperture 5.6, shutter 1/125, "spot focus" selected. I used a tripod with 2-second shutter delay. I used focus magic to correct a 1-pixel focus blur, and a light application of unsharp mask with Photoshop. This is a 100% crop. My moons seem to lack detail. This shot was taken from an 80-foot high tower in windy conditions. Attached Images

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Steve'sDigicams

Recent Camera Reviews

Most Active Forums

Most Popular Deals

Latest Feature Articles

Feb 9, 2006, 10:30 AM	#1
digcamfan Senior Member Join Date: Jul 2002 Posts: 3,422	Moon shots Uncropped - just a little bright/contrast PP Cropped, enlarged with bright/contrast/sharp/edge smooth PP in PSP 8

Feb 9, 2006, 11:00 AM	#2
genece Senior Member Join Date: Jun 2003 Posts: 2,111	Very nice... some of you guys must have steady hands.

Feb 9, 2006, 12:38 PM	#3
treed Senior Member Join Date: Feb 2006 Posts: 118	Quite nice indeed. Looks similar to my moon shot. What shutter speed did you use?

Feb 10, 2006, 6:45 PM	#4
digcamfan Senior Member Join Date: Jul 2002 Posts: 3,422	Sorry, I do not know... I would estimate 1/125 to 1/500. ISO was Auto.

Feb 10, 2006, 11:30 PM	#6
squirl033 Senior Member Join Date: Dec 2004 Posts: 6,868	Ken, what OIS mode did you use? Panasonic recommends using OIS mode 2, or turning it off entirely, when using a tripod. i set my FZ20 for mode 2 and just leave it there. you had all your settings about right, but for some reason, it didn't work out.there's quite a bit of noise, and it looks like the sharpening wasway overdone, perhaps in an attempt to get some detail. it trying to get some detail. also, there's a lot of CA ("purple fringing"), which can sometimes happen with the TCON-17 under high-contrast conditions. i wonder if maybe the wind was more than the tripod could handle... i can't think of anything else, since your settings were pretty much correct...

Feb 11, 2006, 12:57 AM	#7
Ken Rogers Member Join Date: Aug 2005 Posts: 78	OIS 2 was used. I must confess that this was shot through a window, 10 feet from the camera. I tried to do it outside, but winds were gusting over 30 mph, and was making things impossible.

Feb 11, 2006, 1:12 AM	#8
squirl033 Senior Member Join Date: Dec 2004 Posts: 6,868	that window didn't do you any favors, i'm afraid... you had the settings right, though. try it again from outside, on a calm night, and see what you get. here's the kind of detail you should get with that set-up... this was taken at almost the same settings as yours - f5.2, 1/125, ISO 100, OIS mode 2- but shot from a monopod at full 12x zoom,with TCON-14Bconverter. the coloration is because the shot was originally taken at dusk, and when i darkened the sky, the moon turned kinda brown... http://img.photobucket.com/albums/v3...3/P1050302.jpg