Go Back   Steve's Digicams Forums >

LinkBack Thread Tools Search this Thread
Old Mar 16, 2007, 12:37 PM   #1
Junior Member
Join Date: Mar 2007
Posts: 10

For those of you who use the oly fl-36 or fl-50 flash with your fz50, do you switch from ttl to auto when you use the bounce flash? I noticed that when the flash is not pointed straight, the it does not display most of the setting information, are you not supposed to use the ttlauto setting with bounce?
zonaphoto is offline   Reply With Quote
Sponsored Links
Old Mar 16, 2007, 2:50 PM   #2
Senior Member
WindRowe's Avatar
Join Date: Mar 2006
Posts: 729

As soon as the flash head is moved from the "straight on" position, most of the settings information disappears off the flash display because it is no longer applicable. TTL mode measures the incident light during pre-flash and adjusts the flash output accordingly - until you go beyond the limits of the flash.
So I use TTL mode most of the time (whether bouncing or direct or using a diffuser) and, if necessary, adjust the aperture and/or flash output if review of the shot shows the exposure to be off.
At least, that is my 2 cents worth. Hope it helps. The FL-36 manual is not particularly informative on this issue.
WindRowe is offline   Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -5. The time now is 9:38 PM.