Go Back   Steve's Digicams Forums > Software > Printing - Qimage Support Forum

Thread Tools Search this Thread
Old Dec 26, 2005, 3:19 PM   #1
Junior Member
Join Date: Dec 2005
Posts: 1

I've been working with Qimage and the Epson 2200 for a few years and have established a reliable workflow to print to a "half page" with a designated 5.266 x 8.266 (720 x 720).I recently picked up the 7800 and have tried to double thefixedimage per page to an 8 1/2 x 11 sizefor two up on the page. The page size defaults to 8.266 x 10.333 at (360 x 360). At this size, I cannot place the two up per page to match the same size I've been getting on the sngle image per half page. Why wouldn't the page size double to 10.532 so that I can drop two images? Is this a limitation of the printer? I have tried to designate a borderless to manually place but it will defer to a larger print size and not allow 8 1/2 x 11, not even see it on the printer page size? Any clues? BTW, why does the setting go to (360 x 360)? Thanks.
RomanD2 is offline   Reply With Quote
Sponsored Links
Old Dec 28, 2005, 3:06 PM   #2
Senior Member
Join Date: Jun 2002
Posts: 556

It is a physical printer limitation. The 7800 printer cannot feed the paper so that more than 10.333 inches will print on the page. You'll have to reduce the vertical dimension to 5.16 inches if you would like to print two to a page on the 7800. As to the 360 x 360 resolution, just check "Finest details" in the driver and it will run at 720x720.

mchaney is offline   Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

All times are GMT -5. The time now is 7:35 PM.