Go Back   Steve's Digicams Forums >

LinkBack Thread Tools Search this Thread
Old May 19, 2005, 7:20 AM   #1
Senior Member
kimnicho's Avatar
Join Date: Nov 2004
Posts: 155

The following response from cybershotnut (in a recent thread about W1 and blurry shots) prompted me to explore...."what are people's manual settings?" for their Sony point-and-shoot (P and W series especially). I have things set pretty much the same way except I use center AF. So, "what's your M mode?"

"One last thing for you to try: Set the camera to the M position, press the center button and set the shutter speed to 1/100. (says 100 on the display) Next press the menu button and set the focus to 3.0M, set the ISO to 200 and set the flash to +. Leave all other settings at default. Stand about 10 feet away from the subject you're taking a picture of and shoot away! "
kimnicho is offline   Reply With Quote
Sponsored Links
Old May 20, 2005, 12:05 PM   #2
Senior Member
Whisperin Squash's Avatar
Join Date: Oct 2004
Posts: 271

Although I'm always searching for the ultimate setting, I most often use "P" mode with:
Focus=Center AF
Metering Mode=Spot
White Balance=Auto
ISO=Auto or it depends on situation
Flash= Normal or -or+

I also read about blurry pictures and Cybershotnut's advise on settings. So I guess I'm game for whatever looks good and is easy to use on this camera. IMO, it's basically a very nice P&S that I can depend on for spur of the moment shooting. I'll use my FZ20 for more demanding things.
Whisperin Squash is offline   Reply With Quote
Old May 20, 2005, 6:04 PM   #3
Junior Member
Doris's Avatar
Join Date: Mar 2005
Posts: 15

That depends the situations, but generaly I use these setting:

Metering Mode=Multi
White Balance=Auto
ISO=Auto or 200 in low light when flash is not sufficient
Flash= Normal or -or+
Contrast=-1 (a bit more details appear in too dark and too bright areas)
Sharpness=Normal (I think +1 only adds artificial sharpness and then slightly damage the original picture. May be good for print, but not good if you want to retouch)

In P mode: EV=-0.3 or -0.7 (I found that decrease washed color and details in overexposed areas, and also increase the shutter speed in P mode and then that decrease the blurr due to shake)
(In M mode I increase the speed until the EV on the display reach -0.3 or -0.7)
Of course the result may somtimes be a bit too dark, but it is much easier to correct this with P.Shop than blurr or washed details.
Doris is offline   Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -5. The time now is 2:47 AM.