Go Back   Steve's Digicams Forums >

LinkBack Thread Tools Search this Thread
Old Mar 20, 2005, 10:12 PM   #1
Junior Member
allaboutsmiln's Avatar
Join Date: Mar 2005
Posts: 1

I recently bought an Interfit 300i Flash Kit to use with my Canon Digital Rebel 300D. I am new to the studio lights and no instructions came with the lights, so I am totally lost. When I bought the kit, the salesman sold me a Wein Safesynch HSHSB as well.

I thought all of this would be easy to set up, but I can't get my camera to make the light flash.. I hope I am putting the Hot Shoe on correctly, and connecting the interfit flash correctly to the hotshoe....is it that hard to mess up? Could someone give me some kind of direction???

Thanks a lot,
allaboutsmiln is offline   Reply With Quote
Sponsored Links
Old Mar 22, 2005, 6:55 AM   #2
Senior Member
mf_blues's Avatar
Join Date: Jun 2004
Posts: 184

Assuming the safe sync as only the center pin and edge connections, check the polarity of your studio flash. Without the safesync connected to your camera plug flash PC lead into the safesync then using a meter check the voltage across the center pin and edge connector with live on the center, you should get a positive reading. If you get a negative reading then the studio flash isusing negative polarity and you'll need an inverter. Also make sure that when mounting the safesync on your camera that the contacts are touching, you may be mounting it the wrong way round. Hope this helps.
mf_blues is offline   Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -5. The time now is 4:44 PM.