Go Back   Steve's Digicams Forums >

Reply
 
LinkBack Thread Tools Search this Thread
Old Dec 6, 2009, 6:42 AM   #1
Junior Member
 
Join Date: Dec 2009
Posts: 1
Default Encad Novajet PRO 600e not starting up just BEEPS

When I turn my printer on it just beeps.
Two beeps then a pause then two beeps again in an endless
loop.

Before I could move the carriage out from the service station
and find a spot where it started after several tries.
After that it could print although 2 carts were clogged, so I bought
new carts and now this...
I suspected the encoder strip was the fault so I
took it out and cleaned it and the cartridge connections with alcohol carefully.
Or could it be the trailing cable? Firmware?


If anyone could help me with this I would be very grateful!
Danne11 is offline   Reply With Quote
Sponsored Links
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -5. The time now is 8:48 PM.